Toyotomi OM-180 Hot Water Heater

Item #: OM180
Availability: Usually ships the next business day.
Retail: $1,669.95

On Sale!: $1,419.00

You Save 15% ($250.95)


Installation Kit: 
Lifter Pump: 
Quantity:
Toyotomi OM-180 Hot Water Heater
Product Description

A WATER HEATER WITH A BOILER ATTITUDE FOR HYDRONIC HEATING

THIS VERSATILE ON-DEMAND CONTINUOUS FLOW WATER HEATER WITH 87% EFFICIENCY IS DESIGNED FOR HYDRONIC HEATING



Continuous hot water

Compact size and 81 lb. weight allows for oner person installation

Inlets/outlets on two sides for easy installation

Choice of direct vent or chimnet vent

Cold start capability

Flow rate of over 4 gallons per minute with 60°F rise in temperature

Approximately 180°F maximum hot water temperature

Very quiet and reliable operation

Stainless steel heat exchanger and cabinet

Adjustable temperature differential for cycling control

Safe: ETL and home and mobil home approved

Proven trouble-free performance.



Specifications

Flow Rate/Temperature Rise: 6.2 gal/min (40°F rise), 5.0 gal/min (50°F rise)

4.1 gal/min (60°F rise), 3.5 gal/min (70°F rise)

3.1 gal/min (80°F rise)

Ignition High Voltage Discharge Spark

Efficiency 86.5% AFUE rating

Fuel Consumption: 1.05 gal/h

Capacity of Heat Exchanger: 5.10 gal

Temperature Differential Settings: 3.6°F, 18°F, 36°F (3 settings by selector switch)

Fuel System: External tank***

Dimensions (W x H x D): 12-5/8" x 27-3/4" x 22-1/2"

Weight: 81 lbs. Empty

Vent Pipe Hole: 4-3/4" diameter (for flue pipe installation kit)

Maximum Length of Vent Pipe System: 10 ft., 3 bends or less (exhaust pipes for flue pipe installation kit)

Electrical Rating: 120 Volts AC, 60 Hz

Ignition - 120W

Burning - 98W

Fuel Type: No. 2 Fuel Oil (Typical Home Heating Oil) or No. 1 Fuel Oil (ASTM D396)

ASTM No. 1-K Grade Kerosene (ASTM D3699)

Required Accessories: Flue Pipe Installation Kit or 5-inch Chimney Adapter Kit

Fuel Filter and Drain Valve

Safety Device: High Limit Thermistor, Heat Exchanger Bi-metal Switch, Temperature Fuse, Fusible Link Valve Exhaust Air Temperature: less than 500°F Temp & Pressure Relief Valve (included)

Nozzle Size: 0.85 GPH

Spraying Angle: 60°

Spray Pattern: Delavan Type XA

Temperature Fuse: 282°F

Electric Current Fuse:

5 A (Main Control)

7 A (Auxiliary Port for Circulation Pump., etc.)

Optional Accessories: Remote Controller
***Cannot Ship to Alaska, Montana, Idaho, Washington and Canada