2018 Cub Cadet PRO Z 960S KW

$9,000.00


New/Used
Used
Usage
20 Hours
Availability
In Stock
Location
Valley Power Equipment
Title
Clean
Condition
Excellent
Year
2018
Manufacturer
Cub Cadet
Model
PRO Z 960S KW

Overview

Dealer Insights

**Consignment Sale**
Unit was purchased here on 5/8/18 and customer is moving.
Brand new condition with 20 hours unit.
Retails over $12,000

Description

Steering
  • Lap Bar / Steering Wheel Adjustment: Multi-position Quick-adjust steering column
  • Lap Bar / Steering Wheel Control: High Performance Steering Wheel with electronic power steering & Foot-pedal Control
Chassis
  • ROPS: 2 in. x 2 in. spring-latch tool-less foldable 3 position
  • Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
  • Front Axle / Yolks: 2 in. x 3 in. solid axle tube with ISO dampening suspension and 1/2 in. thick steel front yokes
  • Frame: Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots
Operation
  • Cruise Control: Standard - Foot operated pedal engagement
  • Front Tires: 16 in. x 6.5 in. - 8 in. turf
  • PTO Clutch: Warner PTO Clutch (200 ft. lb.) with Soft-Start
  • Seat Type: High-back Air-Ride suspension with EVC cushion, padded arm rests, ISO mounted base (lateral suspension),angle back adjust and lumbar support,seat belt
  • Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever
  • Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
  • Rear Tires: 26 in. x 12 in. - 12 in. (Turf Tread)
Mower Deck
  • Rolled Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
  • Spindle Construction: 8 in. sealed cast aluminum housing (maintenance-free)
  • Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
  • Deck Height Adjustment: Foot pedal with spring assist 16 Positions
  • Deck Material: fabricated 7ga. (.187") steel shell
  • Deck Size/Type: 60 in. FABRICATED DECK
  • Bottom Reinforcement: 7ga. (.187 in.) bottom plate
  • Top Reinforcement(s): 7ga. (.187 in.) top plate
  • Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
  • Cutting Height: 1 in. - 5 in.
  • Discharge Chute: High-density, impact-resistant rubber
  • Spindle Covers: Steel - Tooless Quick Release
  • Side Construction: 5/16 in.(.313) steel on trim and discharge sides
  • Deck Style/Construction: 7ga. top plate 7ga. bottom reinforcement 1/4" rolled leading edge
  • Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
General
  • Cup Holder: Intergrated into Side Pod
  • Hour Meter: Standard electronic
Warranty
  • Warranty: 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
Engine & Drive System
  • Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge
  • Ground Speed: Fwd: 14 mph / Rev: 7 mph
  • Horsepower / CC's: 35hp - 999cc
  • Engine Type: Kawasaki FX1000v
  • Transmission: Parker HTG 16cc pump / 310cc wheel motor
Dimensions
  • L / W / H with discharge chute UP and ROPs DOWN: 88 in. L x 73 in. W x 48 in. H
  • Weight (approx): 1580 lb.

Specs

Engine

Horse Power
35hp - 999cc
Engine Type
Kawasaki FX1000v

General

Transmission
Parker HTG 16cc pump / 310cc wheel motor
Fuel Capacity
Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge

Deck

Deck Size
60 in. FABRICATED DECK

Related Products